NginX 1.2.0 versus Resin 4.0.29 performance tests
From Resin 4.0 Wiki
| Line 28: | Line 28: | ||
====Client HW/OS specs:==== | ====Client HW/OS specs:==== | ||
| − | i7 4 core / 8 HT, 2.8 GHZ, 8Meg Cache, 8 GB RAM. | + | * i7 4 core / 8 HT, 2.8 GHZ, 8Meg Cache, 8 GB RAM. |
| − | Ubuntu 12 / Linux Kernel 3.2.0-26-generic | + | * Ubuntu 12 / Linux Kernel 3.2.0-26-generic |
====Server HW specs:==== | ====Server HW specs:==== | ||
| − | i7 4 core / 8 HT, 2.8 GHZ, 8Meg Cache, 8 GB RAM. | + | * i7 4 core / 8 HT, 2.8 GHZ, 8Meg Cache, 8 GB RAM. |
| − | Ubuntu 12 / Linux Kernel 3.2.0-26-generic | + | * Ubuntu 12 / Linux Kernel 3.2.0-26-generic |
====Test software:==== | ====Test software:==== | ||
| − | Autobench 2.1.1 | + | * Autobench 2.1.1 |
| − | httperf 0.9.0 | + | * httperf 0.9.0 |
====Software under test:==== | ====Software under test:==== | ||
| − | Resin Pro 4.0.29 | + | * Resin Pro 4.0.29 |
| − | nginx 1.2.0 | + | * nginx 1.2.0 |
Revision as of 00:00, 5 July 2012
We have recently run some performance benchmarks comparing Resin 4.0.29 versus NginX 1.2.0.
Contents |
Benchmark tools
The benchmark tests used the following tools:
- httperf
- AutoBench
httperf
httperf is tool produced by HP for measuring web server performance. The httperf tool supports HTTP/1.1 keepalives and SSL protocols.
AutoBench
Autobench is a tool for automating the process of performing a comparative benchmark test against two a web servers. Autobench uses httperf. Autobench runs httperf against each host. AutoBench increases the number of requests per seconds on each iteration. AutoBench delivers output in a format that can be easily consumed by spreadsheet tools. AutoBench has a mode where it can drive multiple clients against a set of servers to minimize the possibility of testing your client throughput instead of server throughput. The command autobenchd is used to run a daemon on client machines. The autobench_admin command drives many clients to run test at same time by communicating with autobenchd.
Setup Overview
http://s3.amazonaws.com/benchmark_nginx12_Resin429/setup_benchmark_diagram.png
Configuration
The only change that was made was the worker_processes were set to 8 for NginX to improve throughput.
Hardware Software Specifications
Client HW/OS specs:
- i7 4 core / 8 HT, 2.8 GHZ, 8Meg Cache, 8 GB RAM.
- Ubuntu 12 / Linux Kernel 3.2.0-26-generic
Server HW specs:
- i7 4 core / 8 HT, 2.8 GHZ, 8Meg Cache, 8 GB RAM.
- Ubuntu 12 / Linux Kernel 3.2.0-26-generic
Test software:
- Autobench 2.1.1
- httperf 0.9.0
Software under test:
- Resin Pro 4.0.29
- nginx 1.2.0
