Embedded: Resin On Raspberry Pi
From Resin 4.0 Wiki
(Difference between revisions)
| Line 3: | Line 3: | ||
=Resin on Raspberry Pi= | =Resin on Raspberry Pi= | ||
| − | We are currently in the early stages of modifying Resin to run on a Raspberry Pi. | + | We are currently in the early stages of modifying Resin to run on a Raspberry Pi. |
| + | |||
| + | Caucho Wiki Raspberry Pi Pages: | ||
* [[Java On Raspberry Pi Performance]] | * [[Java On Raspberry Pi Performance]] | ||
* [[Resin Changes To Support Raspberry Pi]] | * [[Resin Changes To Support Raspberry Pi]] | ||
* [[Paul's Raspberry Pi Journal]] | * [[Paul's Raspberry Pi Journal]] | ||
| − | * [[sddd]] - Paul's dd for SD Card script for OSX | + | * [[sddd]] - Paul's improved dd for SD Card script for OSX |
= Resin on Raspberry Pi : Installation and Configuration = | = Resin on Raspberry Pi : Installation and Configuration = | ||
| − | + | == Preface == | |
| + | |||
| + | I'm going to assume you already have a working Raspberry Pi with Soft-float Raspbian Wheezy installed and updated, accessible via SSH. If not, here are some links to help get you started: | ||
| + | |||
| + | * [http://www.raspberrypi.org/downloads Soft-float Debian Wheezy Download] | ||
| + | * [http://elinux.org/RPi_Easy_SD_Card_Setup Easy SD Card Setup on the Raspberry Pi Wiki] | ||
| + | * [[sddd|sddd - Paul's improved dd for SD Card script for OSX]] | ||
| + | * [http://learn.adafruit.com/adafruits-raspberry-pi-lesson-2-first-time-configuration Adafruit's First time configuration lesson] | ||
| + | * [http://elinux.org/RPi_raspi-config raspi-config on the Raspberry Pi Wiki] | ||
| + | |||
| + | I recommend you run "sudo apt-get update" and then "sudo apt-get upgrade". This will take something like 60 minutes, but it's good to have all the latest updates. | ||
| + | |||
| + | == Java == | ||
| + | |||
| + | * Java 6 and 7 do not support ARMv6 hardware floating-point calculations, so you must use the Soft-float version of Raspbian | ||
| + | * There is an [http://jdk8.java.net/fxarmpreview/ early-access JDK 8 with hard-float support], but we have not tested Resin on JDK 8 yet | ||
| + | * Resin will run on both OpenJDK and Oracle JDK. I recommend Oracle JDK 7 for performance. See [[Java On Raspberry Pi Performance|Java On Raspberry Pi Performance for the results of performance tests of Oracle JDK and OpenJDK on Raspberry Pi with Resin]]. | ||
| + | * To install OpenJDK 7, simply run "sudo apt-get install openjdk-7-jdk". java will install in your path using [http://www.linuxalt.com/ /etc/alternatives] | ||
| + | * To install Oracle JDK download [http://www.oracle.com/technetwork/java/javase/downloads/index.html Java SE 7 JDK, Linux ARM v6/v7 Soft Float ABI] from Oracle. There's nice step-by-step instructions at [http://www.savagehomeautomation.com/pi-jdk Savage Home Automation - Raspberry Pi - Installing Oracle Java Development Kit]. | ||
Revision as of 00:00, 8 February 2013
Contents |
Resin on Raspberry Pi
We are currently in the early stages of modifying Resin to run on a Raspberry Pi.
Caucho Wiki Raspberry Pi Pages:
- Java On Raspberry Pi Performance
- Resin Changes To Support Raspberry Pi
- Paul's Raspberry Pi Journal
- sddd - Paul's improved dd for SD Card script for OSX
Resin on Raspberry Pi : Installation and Configuration
Preface
I'm going to assume you already have a working Raspberry Pi with Soft-float Raspbian Wheezy installed and updated, accessible via SSH. If not, here are some links to help get you started:
- Soft-float Debian Wheezy Download
- Easy SD Card Setup on the Raspberry Pi Wiki
- sddd - Paul's improved dd for SD Card script for OSX
- Adafruit's First time configuration lesson
- raspi-config on the Raspberry Pi Wiki
I recommend you run "sudo apt-get update" and then "sudo apt-get upgrade". This will take something like 60 minutes, but it's good to have all the latest updates.
Java
- Java 6 and 7 do not support ARMv6 hardware floating-point calculations, so you must use the Soft-float version of Raspbian
- There is an early-access JDK 8 with hard-float support, but we have not tested Resin on JDK 8 yet
- Resin will run on both OpenJDK and Oracle JDK. I recommend Oracle JDK 7 for performance. See Java On Raspberry Pi Performance for the results of performance tests of Oracle JDK and OpenJDK on Raspberry Pi with Resin.
- To install OpenJDK 7, simply run "sudo apt-get install openjdk-7-jdk". java will install in your path using /etc/alternatives
- To install Oracle JDK download Java SE 7 JDK, Linux ARM v6/v7 Soft Float ABI from Oracle. There's nice step-by-step instructions at Savage Home Automation - Raspberry Pi - Installing Oracle Java Development Kit.
